Plastered walls can do a lot for the aesthetics of your home. This type of wall surface is also very durable and will offer many years of functionality and protection. Even so, your render work on the wall exteriors will eventually start to show some signs of damage.
When you notice damages like visible cracks, damp patches, loose or flaking render, or see the render crumble away, you should call a professional for render repairs in Melbourne. If this is your first time getting plaster repairs done, you might be a little bit concerned about the process.
Let’s take a look at what to expect when you call a wall restoration company for some render restoration work.
Expect an Inspection
Before the render work is done, the restoration company will visit for an inspection. During this assessment, the condition of your building’s render is inspected. The contractor will check the render work for cracks, bulges, hollow spots, damp or mould issues, and will also evaluate the structural strength of the render.
This is an important step because it will give the contractor a good idea of the type of restoration work that is required. They will determine whether a few patch repairs can restore the wall or if full re-rendering is needed.
After this inspection, your contractor will also be able to give you a detailed and accurate quote for the repair work, so you will know exactly what the restoration process will cost.
Expect Some Prep Work
To get the new render to bond well with the wall or older render, contractors need to properly prepare the area.
First, all of the damaged render is removed by gently chipping away the affected parts. Your contractor might also open up some parts of the wall where the render is hollow or bulging. All affected render is removed, and any cracks or gaps in the wall are opened up so these areas can be filled out.
After removing all damaged render, the surfaces are properly cleaned to remove any loose bits, dust, and grime.
Expect Prime Work
Professional wall restoration companies usually apply a primer or bonding agent to the affected wall surfaces and areas that have been chiselled. In some cases, a key coat or a rough base layer is also applied to ensure that the new plaster will bond well with the wall and the surrounding render.
New Render is Applied
When the bonding agent or primer is dry, the contractor will proceed and start filling out the openings with some new render. This new render is often applied in layers. A scratch coat or base layer with a rough surface is first applied. This is usually followed by a finish coat. This finish coat will have the same smooth finish as the rest of your wall, or it can be created with the same textured finish as the rest of your walls have.
Expect Drying Time
Plaster takes a while to properly cure or dry. In thin render work, the surface can dry within a few hours, but in most cases, it will take about a day or two for the new render to properly dry.
Painting and Finishing
After drying, the wall is primed again and coated in the same paint as the surrounding walls. Render repair contractors usually do their best to match the repair work with the rest of the wall. In most cases, the entire wall will need to be repainted to ensure a smooth and even finish.
The Best Render Repair Company in Melbourne
If your render repairs are done correctly, the wall should be in good shape for many years to come without any need for future repairs. To get this professional result, it is best to hire a professional render repair company like We Fix Walls. Our wall repair company can assist with any type of render repairs you might need and wil fully restore your walls.
Contact We Fix Walls now to get your walls fully repaired.
